Muc Off Precision Tubeless Repair Capsule

• Durable CNC Machined 6061 Aluminium construction
• Premium anodised finish
• Stainless Steel 2-in-1 puncture plug/reamer tool
• Integrated Presta valve core remover slot
• Compact capsule body stashes tyre worms
• Silicone wrap for grip
• Knurled screw in design with weatherproof O-ring
• Compatible with Road, Gravel, and MTBs with tubeless tyre setups

• Capsule/body: 6061 Aluminium
• Puncture Plug tool/reamer: 304 Stainless Steel
• Weight: ~26g (excluding plugs)
• 66 mm x 20 mm
• Colours: Available in Black and Pink 

WHAT'S INCLUDED

• Puncture Plug 2in1 tool and capsule
• Supplied with 15 plugs: 5 thin, 5 medium, 5 thick (Refill packs available separately).
• Cordura® stash pouch

HOW TO

1. Identify the source of the puncture and remove the debris or puncture source.
2. If the puncture requires the medium or larger worms then ream the hole several times with the knurled area of the tool, make sure you use a 45-degree angle and follow the direction of the tyre to ensure you don’t damage your tubeless tape or the tyre wall!
3. Now Grab a tyre worm (you may need to use the tool to help slide out the worms). The largest size is for MTB tyres the medium for gravel tyres and the small for road tyres, but you can select the best one for your sized hole. Now pinch one end of the worm hard between your fingers to flatten it out. (If using the thin worm thread through the tip at the end of the tool, not the main larger slot)
4. Thread through gap at the end of the tool so the worm is now sitting centrally on the tool.
5. Locate the puncture hole then insert the tool through the hole (at a 45 degree angle and follow the direction of the tyre to ensure you don’t damage your tubeless tape or the tyre wall!) until the worm is around halfway through the tyre. Ensure the ends of the worm remain on the outside of the tire.
6. Turning the tool slowly clockwise a few revolutions to twist the worm inside the tire and slowly pull up to remove – leaving the worm in your tyre and the hole plugged.
7. Re-inflate tyre to your desired pressure and you’re ready to roll!(We recommend a max of 80 PSI on a road bike!)
8. Once you are home we’d recommend trimming the worm ends down with a knife so there is a minimum of 3-5mm still sticking out the tyre. (Be careful when trimming).